V7807RC Intel® Pentium® M VITA 31.1 VMEbus Single Board Computer

High performance with VITA 31.1 compliance. The VME-7807RC is a highly flexible single board computer (SBC) that integrates Intel’s Pentium M processor with up to 1.5 Gbyte DDR SDRAM and Dual Gigabit Ethernet with a PCI-X, 66 MHz PMC expansion slot. Operating at up to 1.8 GHz, this SBC provides high bandwidth and processing power and is ideal for I/O intensive applications.

Utilizing Intel’s new highly integrated 6300ESB I/O controller hub, the VME-7807RC offers four serial ports, four USB 2.0 ports, serial ATA, IDE, and up to 2 Gbyte of optional CompactFlash. This SBC utilizes the Intel 855GME to provide SVGA and DVI-I graphics support.

Specifications

Processor

• Intel Pentium M @ 1.1 GHz, 1.4 GHz, or 1.8 GHz

• Favorable thermal characteristics

• 2 Mbyte L2 cache (1.4 GHz and 1.8 GHz options), and 1 Mbyte (1.1 GHz option)

• 400 MHz system and memory bus

SDRAM

• Maximum memory configuration of 1.5 Gbyte of DDR SDRAM with optional ECC support

Compact Flash

• CompactFlash up to 2 Gbyte accessible through secondary IDE port

• CompactFlash may be configured as the boot device through the BIOS boot device set-up

BIOS

• The V7807RC System BIOS and Video BIOS are provided in reprogrammable flash memory.

Ethernet

• Dual Gigabit Ethernet interface using the Intel 82546EB with one port routed to front panel and the second routed to P2

• Both Gigabit Ethernets can be routed to optional P0 connector supporting VITA 31.1

• One 10/100 Mbit Ethernet port on front panel using the Intel 82551ER

USB Ports

• Four USB ports, two routed to front panel and two to P2

• Supported USB features include

– isochronous data transfers

– Asynchronous messaging

– Self-identification and configuration of peripherals

– Dynamic (hot) attachment

V7807RC Intel® Pentium® M VITA 31.1 VMEbus Single Board Computer

VMEbus Backplane Interface

• Tundra Universe II supporting VME64 modes:

A32/A24/D32/D08(EO)/MBLT64/BLT32

Serial Ports

• Four 16550 compatible serial ports

– One RJ45 on the front panel

– Three to P2

• Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud

• All ports are configurable for both RS232/422

PMC Extension Slot

• One 5V PMC expansion site (IEEE 1386.1)

Programmable Timers

• Two 16-bit timers and two 32-bit timers

• Mapped in PCI memory space

• Completely software programmable and can generate PCI bus interrupts

Watchdog Timer

• Programmable Intervals

• Interrupt and board reset triggers

Dimensions

• 6U (4HP) single slot Eurocard form factor

• Height 9.2 in. (233.4 mm)

• Depth 6.3 in. (160 mm)

• Thickness 0.8 in. (20.3 mm)

Power Requirements

• +5 VDC (+5/-2.5 percent), 4.0 A (typical), 5.4 A (maximum)

• +12 VDC (+/-5 percent), less than 1 mA

• -12 VDC (+/-5 percent, less than 1 mA

Note: VME Interface only allows lower voltage of -4.875

Note: Does not include PMC site for power requirements

Airflow

• Forced air cooling required

• 350 LFM minimum, measured at the outlet of

the heatsink

Temperature

• Operating: 0° to +60° C

• Storage: -40° to +80º C

Altitude

• Operating: 0 to 10,000 ft (3,000 m)

• Storage: 0 to 40,000 ft (12,000 m)

Humidity

• Operating: relative humidity 5% to 95%,

non-condensing

• Storage: relative humidity 5% to 95%,

non-condensing

MTBF

• Contact factory

Regulatory

• The V7807RC has been tested and found to meet the requirements of the following standards:

– European Union (CE Mark)

– United States (FCC Part 15, Class A)

– Canada (ICES-003, Class A)

About GE Fanuc Intelligent Platforms Embedded Systems

GE Fanuc Intelligent Platforms is a leading global provider of embedded computing solutions for a wide range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is headquartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Intelligent Platforms has the breadth, experience and 24/7 support to deliver what you need. For more information
Related product recommendations:
IS215UCVEH2AE
IC698CHS009A
IS200EXHSG3A
IC200UDD164
IS220PRTDH1A
IS420UCSCS2A-B-V0.1-A
IS200WREAH1ADB
IS200HSLAH1ADE
IS215UCVGH1AC
IS200AEPAH1BGB
IS200BPPBH2BJD
VMIACC-5595-208
IS200SCTLG1ABA
IC754VSI12CTD-HH
more……